Warning: Incompatible change: Renamed the C API mysql_prepare_result() function to mysql_get_metadata() because the old name was confusing.

Warning: Incompatible change: Client authentication now is based on 41-byte passwords in the user table, not 45-byte passwords as in 4.1.0. Any 45-byte passwords created for 4.1.0 must be reset after running the mysql_fix_privilege_tables script.

Important note: If you upgrade to InnoDB-4.1.1 or higher, you cannot downgrade to a version lower than 4.1.1 any more! That is because earlier versions of InnoDB are not aware of multiple tablespaces.

Added secure_auth global server system variable and --secure-auth server option that disallow authentication for accounts that have old (pre-4.1.1) passwords.

Added --secure-auth option to mysql command-line client. If this option is set, the client refuses to send passwords in old (pre-4.1.1) format.

EXPLAIN now supports an EXTENDED option. When given, EXPLAIN generates extra information that may be viewed with the SHOW WARNINGS statement.

Table aliases are not case sensitive if lower_case_table_names is non-zero.

The --old-protocol option for mysqld is no longer supported and has been removed.

Renamed bdb_version system variable to version_bdb.

MyISAM tables now use a better checksum algorithm (if checksum is enabled with CREATE TABLE ... CHECKSUM=1). Old tables will appear to have incorrect checksum, and should be repaired.

New CHECKSUM TABLE statement for reporting table checksum values.

Added character_set_client, character_set_connection, character_set_database, character_set_results, character_set_server, character_set_system, collation_connection, collation_database, and collation_server system variables to provide information about character sets and collations.

It is now possible to create multiple key caches, assign table indexes to particular caches, and to preload indexes into caches. See Section 13.5.5.1, “CACHE INDEX Syntax”. See Section 13.5.5.4, “LOAD INDEX INTO CACHE Syntax”. Structured system variables are introduced as a means of grouping related key cache parameters. See Section 5.2.3.1, “Structured System Variables”.

Added preload_buffer_size system variable.

New COERCIBILITY() function to return the collation coercibility of a string.

The --quote-names option for mysqldump now is enabled by default.

mysqldump now includes a statement in the dump output to set FOREIGN_KEY_CHECKS to 0 to avoid problems with tables having to be reloaded in a particular order when the dump is reloaded. The existing FOREIGN_KEY_CHECKS value is saved and restored.

You can revoke all privileges from a user with REVOKE ALL PRIVILEGES, GRANT FROM user_list.

Added IGNORE option for DELETE statement.

MySQL source distributions now also include the MySQL Internals Manual internals.texi.

Added mysql_set_server_option() C API client function to allow multiple statement handling in the server to be enabled or disabled.

The mysql_next_result() C API function now returns -1 if there are no more result sets.

Renamed CLIENT_MULTI_QUERIES connect option flag to CLIENT_MULTI_STATEMENTS. To allow for a transition period, the old option continues to be recognized for a while.

Require DEFAULT before table and database default character set. This enables us to use ALTER TABLE tbl_name ... CHARACTER SET=... to change the character set for all CHAR, VARCHAR, and TEXT columns in a table.

Added MATCH ... AGAINST( ... WITH QUERY EXPANSION) and the ft_query_expansion_limit system variable.

Removed unused ft_max_word_len_for_sort system variable.

Removed unused ft_max_word_len_for_sort variable from myisamchk.

Full-text search now supports multi-byte character sets and the Unicode utf8 character set. (The Unicode ucs2 character set is not yet supported.)

Phrase search in MATCH ... AGAINST ( ... IN BOOLEAN MODE) no longer matches partial words.

Added aggregate function BIT_XOR() for bitwise XOR operations.

Replication over SSL now works.

The START SLAVE statement now supports an UNTIL clause for specifying that the slave SQL thread should be started but run only until it reaches a given position in the master's binary logs or in the slave's relay logs.

Produce warnings even for single-row INSERT statements, not just for multiple-row INSERT statements. Previously, it was necessary to set SQL_WARNINGS=1 to generate warnings for single-row statements.

Added delimiter (\d) command to the mysql command-line client for changing the statement delimiter (terminator). The default delimiter is semicolon.

CHAR, VARCHAR, and TEXT columns now have lengths measured in characters rather than in bytes. The character size depends on the column's character set. This means, for example, that a CHAR(n) column for a multi-byte character set takes more storage than before. Similarly, index values on such columns are measured in characters, not bytes.

LIMIT no longer accepts negative arguments (they used to be treated as very big positive numbers before).

The DATABASE() function now returns NULL rather than the empty string if there is no database selected.

Added --sql-mode=NO_AUTO_VALUE_ON_ZERO option to suppress the usual behavior of generating the next sequence number when zero is stored in an AUTO_INCREMENT column. With this mode enabled, zero is stored as zero; only storing NULL generates a sequence number.

Added DROP USER 'user_name'@'host_name' statement to drop an account that has no privileges.

The interface to aggregate user-defined functions has changed a bit. You must now declare a xxx_clear() function for each aggregate function XXX(). xxx_clear() is used instead of xxx_reset().

Added new ADDTIME(), DATE(), DATEDIFF(), LAST_DAY(), MAKEDATE(), MAKETIME(), MICROSECOND(), SUBTIME(), TIME(), TIMEDIFF(), TIMESTAMP(), UTC_DATE(), UTC_TIME(), UTC_TIMESTAMP(), and WEEKOFYEAR() functions.

Added new syntax for ADDDATE() and SUBDATE(). The second argument now may be a number representing the number of days to be added to or subtracted from the first date argument.

Added new type values DAY_MICROSECOND, HOUR_MICROSECOND, MINUTE_MICROSECOND, SECOND_MICROSECOND, and MICROSECOND for DATE_ADD(), DATE_SUB(), and EXTRACT().

Added new %f microseconds format specifier for DATE_FORMAT() and TIME_FORMAT().

All queries in which at least one SELECT does not use indexes properly now are written to the slow query log when long log format is used.

It is now possible to create a MERGE table from MyISAM tables in different databases. Formerly, all the MyISAM tables had to be in the same database, and the MERGE table had to be created in that database as well.

Added new COMPRESS(), UNCOMPRESS(), and UNCOMPRESSED_LENGTH() functions.

When using SET sql_mode='mode' for a complex mode (such as ANSI), we now update the sql_mode variable to include all the individual options implied by the complex mode.

Added the OLAP (On-Line Analytical Processing) function ROLLUP, which provides summary rows for each GROUP BY level.

Added SQLSTATE codes for all server errors.

Added mysql_sqlstate() and mysql_stmt_sqlstate() C API client functions that return the SQLSTATE error code for the last error.

TIME columns with hour values greater than 24 were returned incorrectly to the client.

ANALYZE TABLE, OPTIMIZE TABLE, REPAIR TABLE, and FLUSH statements are now stored in the binary log and thus replicated to slaves. This logging does not occur if the optional NO_WRITE_TO_BINLOG keyword (or its alias LOCAL) is given. Exceptions are that FLUSH LOGS, FLUSH MASTER, FLUSH SLAVE, and FLUSH TABLES WITH READ LOCK are not logged in any case. For a syntax example, see Section 13.5.5.2, “FLUSH Syntax”.

New global system variable relay_log_purge to enable or disable automatic relay log purging.

LOAD DATA now produces warnings that can be fetched with SHOW WARNINGS.

Added support for syntax CREATE TABLE table2 (LIKE table1) that creates an empty table table2 with a definition that is exactly the same as table1, including any indexes.

CREATE TABLE tbl_name (...) TYPE=storage_engine now generates a warning if the named storage engine is not available. The table is still created as a MyISAM table, as before.

Most subqueries are now much faster than before.

Added PURGE BINARY LOGS as an alias for PURGE MASTER LOGS.

Disabled the PURGE LOGS statement that was added in version 4.1.0. The statement now should be issued as PURGE MASTER LOGS or PURGE BINARY LOGS.

Added SHOW BDB LOGS as an alias for SHOW LOGS.

Added SHOW MASTER LOGS as an alias for SHOW BINARY LOGS. (In 4.1.0, SHOW MASTER LOGS was renamed to SHOW BINARY LOGS. Now you can use either one.)

Added Slave_IO_State and Seconds_Behind_Master columns to the output of SHOW SLAVE STATUS. Slave_IO_State indicates the state of the slave I/O thread, and Seconds_Behind_Master indicates the number of seconds by which the slave is late compared to the master.

The --lower-case-table-names=1 server option now also makes aliases case insensitive. (Bug#534)

Changed that the relay log is flushed to disk by the slave I/O thread every time it reads a relay log event. This reduces the risk of losing some part of the relay log in case of brutal crash.

Fixed mysql parser not to erroneously interpret ‘;’ character within /* ... */ comment as statement terminator.

Fixed merging types and length of result set columns for UNION operations. The types and lengths now are determined taking into account values for all SELECT statements in the UNION, not just the first SELECT.

Fixed a bug in privilege handling that caused connections from certain IP addresses to be assigned incorrect database-level privileges. A connection could be assigned the database privileges of the previous successful authentication from one of those IP addresses, even if the IP address username and database name were different. (Bug#1636)

Error-handling functions were not called properly when an error resulted from [CREATE | REPLACE| INSERT] ... SELECT statements.

HASH, BTREE, RTREE, ERRORS, and WARNINGS no longer are reserved words. (Bug#724)

Fix for bug in ROLLUP when all tables were const tables. (Bug#714)

Fixed a bug in UNION that prohibited NULL values from being inserted into result set columns where the first SELECT of the UNION retrieved NOT NULL columns. The type and max_length of the result column is now defined based on all UNION parts.

Fixed name resolution of columns of reduced subqueries in unions. (Bug#745)

Fixed memory overrun in subqueries in select list with WHERE clause bigger than outer query WHERE clause. (Bug#726)

Fixed a bug that caused MyISAM tables with FULLTEXT indexes created in 4.0.x to be unreadable in 4.1.x.

Fixed a data loss bug in REPAIR TABLE ... USE_FRM when used with tables that contained TIMESTAMP columns and were created in 4.0.x.

Fixed reduced subquery processing in ORDER BY/GROUP BY clauses. (Bug#442)

Fixed name resolution of outer columns of subquery in INSERT/REPLACE statements. (Bug#446)

Fixed bug in marking columns of reduced subqueries. (Bug#679)

Fixed a bug that made CREATE FULLTEXT INDEX syntax illegal.

Fixed a crash when a SELECT that required a temporary table (marked by Using temporary in EXPLAIN output) was used as a derived table in EXPLAIN command. (Bug#251)

Fixed a rare table corruption bug in DELETE from a big table with a new (created by MySQL-4.1) full-text index.

LAST_INSERT_ID() now returns 0 if the last INSERT statement didn't insert any rows.

Fixed missing last character in function output. (Bug#447)

Fixed a rare replication bug when a transaction spanned two or more relay logs, and the slave was stopped while executing the part of the transaction that was in the second or later relay log. Then replication would resume at the beginning of the second or later relay log, which was incorrect. (It should resume at BEGIN, in the first relay log.) (Bug#53)

CONNECTION_ID() now is properly replicated. (Bug#177)

The new PASSWORD() function in 4.1 is now properly replicated. (Bug#344)

Fixed a bug with double freed memory.

Fixed a crashing bug in UNION operations that involved temporary tables.

Fixed a bug that under certain circumstances could allow a privilege escalation via database wildcards in GRANT. (Bug#3924, CVE-2004-0957)

Fixed a crashing bug in DERIVED TABLES when EXPLAIN is used on a DERIVED TABLES with a join.

Fixed a crashing bug in DELETE with ORDER BY and LIMIT caused by an uninitialized array of reference pointers.

Fixed a bug in the USER() function caused by an error in the size of the allocated string.

Fixed a crashing bug when attempting to create a table containing a spatial (GIS) column with a storage engine that does not support spatial types.

Fixed a crashing bug in UNION caused by the empty select list and a non-existent column being used in some of the individual SELECT statements.

Fixed a replication bug with a 3.23 master and a 4.0 slave: The slave lost the replicated temporary tables if FLUSH LOGS was issued on the master. (Bug#254)

Fixed a security bug: A server compiled without SSL support still allowed connections by users who had the REQUIRE SSL option specified for their accounts.

When an undefined user variable was used in a updating query on the master (such as INSERT INTO t VALUES(@a), where @a had never been set by this connection before), the slave could replicate the query incorrectly if a previous transaction on the master used a user variable of the same name. (Bug#1331)

Fixed bug with prepared statements: Using the ? prepared statement parameter as the argument to certain functions or statement clauses caused a server crash when mysql_prepare() was invoked. (Bug#1500)

Fixed bug with prepared statements: after call to mysql_prepare placeholders became allowed in all consequent statements, even if they are not prepared (Bug#1946)

SLAVE START (which is a deprecated syntax, START SLAVE should be used instead) could crash the slave. (Bug#2516)

Fixed bug in ALTER TABLE RENAME, when rename to the table with the same name in another database silently dropped destination table if it existed. (Bug#2628)

When not specify hostname in SET PASSWORD FOR user it's now defaulted to % instead of the current host.